Hikvision video surveillance storage server configuration steps
Before configuring the storage server recording, please make sure that both the 4200 client and the storage server have been installed, that is, two icons are generated on the computer. When installing the software, select Install Storage Server and install it in the same directory as the software iVMS-4200. Double-click the desktop shortcut icon, or enter the installation directory (default: \ iVMS-4200 \ iVMS-4200 Storage) to open the storage server. Displayed in the taskbar at the lower right corner of the computer, indicating that the server was successfully started.
Step 1: Add a monitoring point. Select the device to be added in the encoding device. For example, select the IP / domain method to enter the address, user name, and password (device user name and password).
Step 2: After the storage server is enabled, select Device Management-Add a device type and select a storage server. After the addition is complete, the storage server will appear in the server list. Select the storage server, click the IP of the selected computer in the online device, click Add to the client, and customize the alias. Username admin Password 12345 After the storage server is added, click Remote configuration. Storage-often select the hard disk, click format, and pre-allocate the remaining space on the computer disk. This operation does not affect the original data on the computer hard disk. After formatting is complete, restart the storage server as prompted (this operation cannot be omitted)
Step 3: Control Panel-Recording plan Select the monitoring point to be recorded, check the storage server recording, select the alias of the storage server, configure the recording template, and click Save to save the recording plan.
Step 4: If there are multiple monitoring points that need to be recorded (at present, a storage server supports up to 64 monitoring points), click Copy to in the upper right corner to copy to other monitoring points. Check the recording plan and the storage server recording plan. Tick the monitoring points of the video you want to record, and save it.
Step 5: In remote playback, select the monitoring point, and select the time on the calendar. If the recording is successful, there will be an orange triangle on the corresponding date. Searching for the recording indicates that the recording was successful.
- Explanation of four common problems in network monitoring engineering
- How to install monitoring in the elevator? 1/15/2020
- Intelligent weak current engineering video surveillance system monitoring pole knowledge summary 2020/1/8 1
- Technical Problems Facing the Development of Ultra-high-definition Video Surveillance 2020/1/8 1
- Hikvision user-defined ball machine bracket thread interface parameters 2020/1/2 1
- Explanation of Chongqing monitoring system installation specifications 2020/1/2 1
- User-defined ball machine bracket thread interface parameters
- How to check the monitoring screen when the mobile phone cannot connect to the Internet? 2019/12/25
- Explanation of various alarm functions of Haikang video recorder
- Hikvision monitoring system prompts "code stream type is not supported" how to solve? 2019/12/18
- Hikvision video surveillance storage server configuration steps
- How should the network video surveillance project realize the construction of the network environment?
- Hikvision DS-4000HC, HC +, HCS, HF, MD series boards frequently asked questions2019 / 12/4
- Third-party domain name access to Hikvision surveillance cameras on the Internet
- Internet Video Surveillance Solution Based on Dynamic IP
- "The fusion of material and information, AI empowerment" as the theme of the wonderful appearance
- Top 10 most popular surveillance camera brands in 2019
- Home remote monitoring camera installation method
- What should I pay attention to when installing a video surveillance camera? 2019/11/13
- Explanation of methods for selecting security monitoring equipment